Ld3000 Disaster Rescue Equipment Life Detector
Product Description
The following precautions should be adhered to in order to prevent damage from misuse:
1. Avoid moving the articulating joint manually. It should only be moved by the control switch on the control grip.Repeated manual movement of the camera head may damage the servo.
2. Avoid collisions the camera head in sharp objects.Damage will occur if the camera was fierce collision.When in doubt,stop and examine the situation carefully.Always avoid stress to the camera head.
3. The entire equipment is not waterproof.Do not intentionally immerse the equipment in water. LD3000 search and rescue cameras are not designed for underwater search operations.
4. When connecting the battery,always take the time to line up the connector index keys.No amount of force will allow the connection to be made until the index keys are aligned.
5. Always store the equipment with the battery disconnected. If the battery is left connected during storage, the battery will be deep discharged causing battery damage.
Life detector Specification:
1> WD-LD3000 control box
The WD-LD3000 control box is the main control center for all whole cameras.
All controls and connections are located on the box of the control console.
| Display Monitor | 7"Digital Screen DVR Quad Monitor with Removable Sun Visor |
| Color System | PAL/NTSC |
| Display Resolution | 2400(H) X 480(V) dot |
| DVR Video Resolution | 640x480 |
| DVR Saving Card | Support One SD Card |
| DVR Saving Capacity | Support One SD Card (Max 32GB) |
12 pieces LED white lights provide the high brightness.
The LED intensity can be adjusted for day or night-time use.
Press the button 6 on the control box to adjust the brightness
5> Talkback between Rescuers and Victims
6> Battery
Equipped with two pieces rechargeable battery. Each unit Li Battery 10000mAh capacity and support 5-8 working hours.
When need to charge, just need insert the standard equipped 12V charger to refresh the battery built inside the box.
The light on thechargers surface will turn from red to green when it is full charged
The tube sets are combined by 4 sets aluminium probe.
The spring lock can tight the connections of the rods.
Can be expand to 3.5meter.
8> Set Up Plugs Usage
For example:
1. Push the connector into the place until it locks.
2. To remove the cable, grasp the knurled section of the plug and slide it straight back. The knurled section will pull back slightly and release the lock. Do not twist.Use red mark to align to key slot Slide knurled section of plug straight back to remove.
9> The WD-LD3000 camera is shipped in a protective transport case.
The kit includes all of the following:
1. Tube Set*1pcs
2. Battery*1pcs
3. Battery*1pcs
4. 7'' digital screen TFT LCD color monitor*1pcs
5. Control box
6. Camera*1pcs
7. Vest *1pcs
8. ABS water tight case
Product Categories : Life detector
